PRODUCTS

Hoisting Equipment

Whether it's an electric, pneumatic or manual hoist, a hand chain or lever operated hoist, hook suspension or integral trolley mount, we have every option covered.

We stock manual chain hoists from 500 kg to 10,000kg capacity and lever operated hoists from 250kg to 9000 kg capacity. Various makes and models and every combination are available, if not from stock then most available the next working day.

Integral Trolley & Hoist Combinations

Integral hoist & trolley combinations are ideal when there is a lack of headroom. Supplied with a push travel beam trolley and capacities up to 5000kg, and also with a geared travel beam trolley and capacities up to 10000kg. Height of lift on hoists and also drop of hand chain(s) cut to suit your requirements.

Manual Wire Rope & Webbing Winches

Hand winches, sold in various sizes / capacities / finishes and with or without wire or webbing. Ideal winch for a trailer or caravan and also for light duty lifting applications. Call for more details.

Beam Clamps

Unit shown is a standard beam clamp used when a fixed single point lift is required. Capacities from 1000 to 10000kg available. Vast selection of clamps available for all applications (see our General Lifting Equipment and Construction Equipment sections for more details)

Beam Trolleys

Push travel and geared travel beam trolleys from 500kg to 20000kg capacities to suit a range of beam widths. Geared trolleys supplied with hand chain length to suit your requirements. Also available in either standard or corrosion resistant finishes.

Chain Hoists

With a very low tare weight and very compact design, this lever hoist is ideal for confined working conditions. Fitted with a free wheel device for quick chain adjustment. 250 and 500kg capacities.

Corrosion Resistant Integral Hoists / Trolleys

Basically, the same combination of units listed above, but supplied in a corrosion resistant finish instead of a standard finish

D85 `Pul-lift` Lever Hoist

The D85 Pul-lift is the original ratchet lever hoist. An extremely tough and rugged construction makes this unit the perfect choice for all applications and industries. Capacities from 750 to 10000kg, with a standard height of lift of 1.5mtrs, but can be chained to suit your requirements.

Heavy Duty Wire Rope Pullers

This range of portable cable pullers provide a versatile tool for pulling, lifting, lowering, tensioning and securing loads over long distances. They are easy and safe to use and are almost service free. Supplied with spare shear pins, operating handle and wire ropes of lengths to suit your requirements.

Manual Chain Hoists

Manual chain hoists from 500kg to 10000kg capacities. Usually sold as 3mtr height of lift, but we can chain these units to suit your requirements on both the load chain and also the operating hand chain. Canvas chain collecting bags are also available for the load chain to collect in, thereby reducing the number of chains hanging by the load being lifted.

Pressed Steel Ratchet Lever Hoists

Pressed steel housing on this unit makes for an extremely low weight, versatile and all round ratchet lever hoist suitable for almost all standard applications. Fitted with a free wheel device for quick hook positioning to load. Sold in following capacities; 800kg, 1600kg, 3200kg & 6300kg.

Spur Gear Drive Manual Wire Rope Winches

With enclosed gear drives for protection of internal components, even under tough working conditions, this very compact designed winch is easy & quick to mount onto walls, poles, towers etc. Capacities from 125 to 2000daN for both lifting and pulling. Wires sold seperately to the length you require.

Towerlift ES Hoists

The Towerlift ES is a further development of the Towerlift. Like the Towerlift, the ES model is provided with a chain reeving system, specifically designed for the stage / entertainment industry. This allows operation in standard hoist configuration as well as in inverted mode. The hoist comes complete with a revolving chain container, which can be used in both standard or inverted configurations. Available in 1000kg SWL

Towerlift Hoists

The Yalelift360 Towerlift is the inverted version of the Yalelift 360 and specifically designed for operation on traversing tower systems. It is provided with a special chain guide and totally enclosed housing. The basic version of the Towerlift offers capacities of 1000 and 2000kgs and is supplied in black powder coat finish.

UNOplus Ratchet Lever Hoists

The UNOplus is a versatile ratchet lever hoist designed for pulling, lifting and lashing of loads. The unit is lightweight and comes with a free wheel device as standard that allows for quick slack take up / positioning of hook to load. Supplied in capacities from 750 to 6000kg.

Ultra Low Headroom Manual Chain Hoist with Integral Push

The hand chain hoist model Yalelift LH with integral low headroom manual push or geared trolley is the latest development of the Yalelift IT. Where even smaller headroom is essential, the Yalelift LH is the ideal choice. Push travel option available from 500 to 5000kg capacities and the geared travel option available from 500 to 10000kg capacities. Height of lift to suit your requirements.

Worm Gear Drive Manual Wire Rope Winches

Worm shaft driven winches with large rope take up and on models above 2000daN and above, 2 lifting speeds by means of different setting of the crank handle. Optional extras include; free wheeling device, grooved rope drum and multi drum options. Capacties from 250daN to 5000daN. Wire ropes sold seperately to the length you require.

Yalelift 360 Hand Chain Hoist

The Yalelift 360 chain hoist, with its revolutionary hand chain guide system, allows the operator new avenues of safety due to the 360 degree rotating hand chain guide which will facilitate operation of the hand chain from virtually any position, even in extremely confined areas. Supplied in either a powder coat or corrosion resistant finish, available in capacities from 500 to 20000kg and can be chained to suit your height of lift requirements. Canvas chain collectors also available for this hoist.

We have used JD Lifting's services from supply to certification for a number of years. As a manufacturing company lifting heavy items it is of paramount importance that our lifting equipment is supplied, tested and certified to ensure the safety of our operatives. Working with such a comprehensive, efficient and competent company ensures we feel safe with the equipment we use. JD Lifting have our well deserved faith and provide the reliability we need no matter the challenge. Their support, service and advise has always been very efficient and always meets our very demanding needs.

Matt Moss : Company Director, Poundfield Products :
We have been dealing with Jon for a number of years now, he originally updated us with the latest testing techniques and regulations, built a special test jig and we now have a fully tested and certified product, which conforms to all existing safety standards. He now deals promptly with all our testing, which means our customers are happy and we get paid promptly. His company is a real asset to our business and we proudly share this on our website www.largeanimalrescue.co.uk. Keep up the good work.

Allan Byrne : Allan Byrne, Proprietor :
JD Lifting have provided us with competitively priced and good quality lifting equipment, alongside real solutions for problematic and complex lifting tasks on site.

Paul Latham : Suez recycling and recovery UK, Assistant Maintenance Manager :
DaRo products have recently procured two new 5 Mtr swing beams each capable of lifting 250 kilos. The electric hoists are fitted with dual speed options and can be slewed at 180 degrees between bays. This latest acquisition enables the safe lifting of welded fabrications for our team and optimizes the productivity times for our customers. Big thanks to Jon and his team at JD Lifting Ltd on their swift install and commissioning.

Stuart Clarke : DaRo Products Ltd, Sales Manager :
We have used JDL for many years and have always found them to be extremely efficient, competitively priced and very thorough in their work with excellent attention to detail. I would happily recommend their services.

Michelle Penman : Western Homes, Plant Yard Administrator :
As a company we have been dealing with JD Lifting for many years and I cannot recommend them enough. A great range of equipment is available for our HGV's (usually from stock) and if we request anything out of the ordinary sourcing it is never too much trouble. For me JD Lifting came into their own when I took on a new role at work and was a little green with the terminology and lifting capabilities on some items. If I am ever unsure then all I need to do is give JD Lifting a call and Jon and his team are always there to answer any questions and give a full explanation of a product or recommend something suitable. This is fantastic and definitely a service that I know I would not get elsewhere. JD Lifting have saved us from a few sticky situations over the years when we have needed something in a hurry. It's good to know that I have the back up when I need it. I know this is a company I can rely on and would not hesitate to recommend them 100%.

Emily Carter : David Watson Transport Ltd, EC Service Manager :
J L Knight Roadworks have been using JD Lifting for the supply, inspection, repair and re-certification of all our lifting equipment requirements since JD Lifting first started in January 2008. Their service is top class, and no matter how big or small the job, we know they will always deliver without delay. Would highly recommend them.

Ashley King : J.L. Knight Roadworks Ltd, Assistant Plant Manager :